Search:

Type: Posts; User: BoostedYote

Page 1 of 5 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    8
    Views
    232

    Oz is junk. They just modify Whipple files. Pbd...

    Oz is junk. They just modify Whipple files. Pbd is who you need
  2. Apply the RPM patch

    Apply the RPM patch
  3. Replies
    2
    Views
    202

    Only needs a crank relearn

    Only needs a crank relearn
  4. Replies
    5
    Views
    233

    Also You are not even logging the pids we need to...

    Also You are not even logging the pids we need to see.
  5. Replies
    5
    Views
    233

    You will burn up your transmission clutches asap...

    You will burn up your transmission clutches asap with that tune
  6. bump

    Can you upload the file you sent them?
  7. Can you upload the file you sent them?

    Can you upload the file you sent them?
  8. Anyone have a 2018-2019 Roush os for mustangs with the map sensor?

    Anybody have a 2018 or 2019 Roush auto file that scans on the datalogger?
  9. Looking for a 11-14 Boss 302 stock file

    Anybody have one?
  10. Replies
    5
    Views
    226

    Are limits turned off?

    Are limits turned off?
  11. Replies
    2
    Views
    130

    P0605 comes up when you do a calibration flash on...

    P0605 comes up when you do a calibration flash on the Copperheads. Either write entire or set P0605 to no error reported and flash calibration
  12. Replies
    1
    Views
    155

    This is shift tq management. If you don't want it...

    This is shift tq management. If you don't want it to close throttle go to airflow, Throttle body and set to reduction airmass to 0
  13. Raise combustion stability limit in the management

    Raise combustion stability limit in the management
  14. Replies
    7
    Views
    304

    Get the data from a FRPP tune that gas the GT350...

    Get the data from a FRPP tune that gas the GT350 tb and Mani. There is one somewhere posted up
  15. Are the limiters disable? I am running into a...

    Are the limiters disable? I am running into a issue where the TB is closing based on knock retard
  16. Replies
    15
    Views
    603

    Make the extra cells the same as the last data...

    Make the extra cells the same as the last data point
  17. Replies
    6
    Views
    394

    Upload file. So only thing you are changing his...

    Upload file. So only thing you are changing his MAF Period?
  18. Are you the guy behind JN2ning?

    Are you the guy behind JN2ning?
  19. Replies
    5
    Views
    258

    Thanks!

    Thanks!
  20. Replies
    5
    Views
    258

    2003 1500 5.3 cam tuning

    I just finished my BTR stage 2 truck cam install on my 5.3. I haven't tuned a cam truck before but want to learn. Do I just need to raise idle airflow? Can I log something telling me what percent off...
  21. Replies
    0
    Views
    149

    2012 Camaro v6

    i have a 2012 V6 Camaro. How would i go about making the exhaust pop on decel? I know to Disable DFCO but do they have a decel timing table to lower spark to pop or would it need to be done in the...
  22. Replies
    24
    Views
    1,257

    Do you have a read of the procharger tune before...

    Do you have a read of the procharger tune before you modified it?
  23. Did you put in ID data for the injectors? I used...

    Did you put in ID data for the injectors? I used their data and get -28 fuel trims for some reason. 2016 Whipple car on whipple OS
  24. Replies
    3
    Views
    305

    2015 Mustang GT Whipple -28 Fuel trims

    I have a 2015 Whipple 2.9 mustang GT on a Whipple OS. It has the 72 LB Injectors in it and I swapped to the 1050x Injectors and used IDs data. Now I have -28 fuel trims. Is it best to adjust high and...
  25. Worst case I could just redefine the tables in...

    Worst case I could just redefine the tables in their new locations and edit it outside or hpt. I would just prefer to make it where I can read with hpt as their layout is much better them my other...
Results 1 to 25 of 122
Page 1 of 5 1 2 3 4