Search:

Type: Posts; User: MakesBadDecisions

Page 1 of 7 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    14
    Views
    654

    Howdy fellas, Does anyone have a 97 cherokee...

    Howdy fellas,
    Does anyone have a 97 cherokee file?
    I have someone interested in tuning on one and I would like to see a file before I commit.
    Thanks in advance
  2. Just to clarify. If you want to run dual 0310's...

    Just to clarify.
    If you want to run dual 0310's you will need some of the Dr. Mike magic.
    If you run a single 0310 you need no Dr. Mike magic. I have had a couple that would not work for some...
  3. No problem, hope it works as smooth for you as it...

    No problem, hope it works as smooth for you as it has for me.

    The instructions, attached, for the 30-0310 say you can program the different address yourself, end of page 3. Never had a chance to...
  4. I dont have any pictures as the stuff is...

    I dont have any pictures as the stuff is installed under the dash clean on my personal truck. I use a similar setup in project vehicles with dual wideband bungs, currently in use as well. I use the...
  5. The 30-0310 has CAN Hi and Lo wires that then get...

    The 30-0310 has CAN Hi and Lo wires that then get soldered to the respective CAN Hi and Lo wires at the OBD port, I use an OBD y-splitter that can be unplugged from the factory OBD port allowing for...
  6. Without cats it was too loud, ended up putting...

    Without cats it was too loud, ended up putting huge resonator after y-pipe which took the bark out, but still loud. I took the lope out as it was annoying in traffic as its still a truck that doesn't...
  7. I have same cam in L86, with LTH no cats and CAI...

    I have same cam in L86, with LTH no cats and CAI and start up, idle, remote start and drive abilty is better than stock, even this morning with temps at -14F. Stock torque tables and slightly...
  8. Way to stick with it and make it happen. Glad it...

    Way to stick with it and make it happen. Glad it is working like you want. Nice work!!

    Care to share an after log? That would maybe help to see the cause and affect of what you did using the above...
  9. Give it try after comparing and looking at it. I...

    Give it try after comparing and looking at it. I didnt change much, really a cause and effect test. Im still working on the nit picky, mid to moderate throttle driveability on my personal vehicle and...
  10. My setup is a magnuson supercharger so yes, very...

    My setup is a magnuson supercharger so yes, very different, obviously. No matter what, it is about working with what we have to control torque demanded and torque delivered and unfortunately we are...
  11. In just finishing my cammed and supercharged L86...

    In just finishing my cammed and supercharged L86 A8 at 8psi truck I found the torque tables to be very low in respect to what the engine was actually making. The reported torque was lower than the...
  12. Replies
    35
    Views
    53,275

    I run 2 AEM 30-0310 on my personal truck and have...

    I run 2 AEM 30-0310 on my personal truck and have them wired into the CANH and CANL at the OBD port and scanner picks it up as another controller or controllers in my case.

    I use the AEM 30-0334...
  13. Idle at 1000, spark table the way it is, PE that...

    Idle at 1000, spark table the way it is, PE that lean, VT tables and VVE tables are interesting, VVT on WOT only, MAF only.

    Makes me wonder
  14. Replies
    45
    Views
    2,852

    You need a hug? Maybe some coffee with an Irish...

    You need a hug? Maybe some coffee with an Irish Kick?

    Most should understand what he meant and as the thread went on to explain how important dialing the air models were. Spending the time to get...
  15. Replies
    45
    Views
    2,852

    Going that route unfortunately would mean the VVE...

    Going that route unfortunately would mean the VVE airmodel is incorrect therefore outputting incorrect values. Not saying that it does not work, but it is a bandaid and nothing more.

    I am...
  16. Replies
    45
    Views
    2,852

    Thanks for adding to this thread. Questions...

    Thanks for adding to this thread.

    Questions for you.

    Following along with the issue MORLOK is having. As ACTTrq crosses over MAXTrq the TB opens 100%. Now in this case MAXTrq is not limiting...
  17. Replies
    45
    Views
    2,852

    Good stuff, more of a broad overview with good...

    Good stuff, more of a broad overview with good tidbits. Was it worth it, yes, small price to pay for some education. I was hoping for more VTT info and how to edit if needed. He touched on all the...
  18. Not 100% what and why. After the Desoot was found...

    Not 100% what and why. After the Desoot was found it "fixed" the momentary lean tip in stuff. Just something I automatically turn off. I would speculate it is part of some emissions shenanigans.
  19. Glad it was something simple

    Glad it was something simple
  20. Replies
    45
    Views
    2,852

    Ok, I did not want to assume on which one or both...

    Ok, I did not want to assume on which one or both that you changed.

    I agree with your take on Engine Torque Coeff EQ Ratio and how it works. Wouldn't the MAP be the basis of estimated torque, as...
  21. Replies
    45
    Views
    2,852

    Good to hear you made progress. I finished...

    Good to hear you made progress. I finished polishing out the air models and worked on getting some maths done in the scanner in preparation for some dyno time.

    So you only changed the VTT for...
  22. Replies
    1
    Views
    180

    I just seen this last night. There is a link at...

    I just seen this last night. There is a link at the bottom outlining the procedure. Good info in there as well.
    ...
  23. Injector Desoot - possibly under fuel - general -...

    Injector Desoot - possibly under fuel - general - injector control all the way at bottom if enabled you should disable and re-test. That may be your issue.
  24. Replies
    45
    Views
    2,852

    Here you go. Great stuff in there and lots of...

    Here you go. Great stuff in there and lots of great points, thoughts and ideas just no super clear conclusion. Took me reading it a couple more times but gave me several new clues.

    One for sure is...
  25. Replies
    45
    Views
    2,852

    Here is a 17' ZL1 and Silverado, just look at how...

    Here is a 17' ZL1 and Silverado, just look at how different the predictions look, all of them. Sure supercharged vs turbo is different but in the end those tables should give an idea to how it works...
Results 1 to 25 of 155
Page 1 of 7 1 2 3 4