Open a file, go to the edit tab and select view then change the setting from basic to advanced. This will open more tables.
Type: Posts; User: JohnnyK05
Open a file, go to the edit tab and select view then change the setting from basic to advanced. This will open more tables.
I have an 05 and had no issues so far changing the 3-4 upshift tables.
Correct me if I am wrong. This is a rebuild 5.9L with 60hp injectors, stock turbo and stock tune? How hard has the engine been worked so far? These engines like to be worked to seat in. Who's...
Why do you want to reduce pulse?
This might be a silly question but do you have anything else connected to the OBD while flashing? If so remove any pass through or spliced devices.
I don't tend to post on forums much do to situations like this getting people all fired up. I think we all greatly appreciate all the knowledge and help that more experienced people have to offer and...
PM sent.
I had a couple of stumble at first but everything seems good now. What's your issue?
The comment was meaning that you should spent some time smoothing out the map. When you look at the timing particularly it is quite jagged. Smooth out the high and low peaks. Adding timing is best...
I have found in the past with other software is if the timing is too low I would get misfiring as I rolled into it. If you turn off pre-injection without advancing the main enough you get the same...
I believe that you will have to bump those up more. I am not sure if all of them need to be high but on my 05 auto I had to set them higher than 4500. Still figuring out which is which.
Will any engine support be included with this?
BD Diesel VB also has the feature along with 1st lockup in the 48RE which I don't recommend using. Gets a bit aggressive.
I believe a valve body modification is required to allow that possibility.