Search:

Type: Posts; User: Steven@HPTuners

Page 1 of 7 1 2 3 4

Search: Search took 0.00 seconds.

  1. Could you take a log with the Shift Source Base...

    Could you take a log with the Shift Source Base logged? The warmup mode is seldom used as is by most OEMs I've noticed, but that will indicate what "process" is controlling it.
    I wonder if the ECM...
  2. We do not support a method of completely changing...

    We do not support a method of completely changing the OS back to the old one. That'd require an entire read of what is on the controller, and we only read the calibration data due to limitations in...
  3. I'm not in the Chicago region, but I've heard ;) ...

    I'm not in the Chicago region, but I've heard ;)

    That sounds like it believes the parameter is there but it errors during logging.
    You could try doing a Repoll for Supported Parameters (in the...
  4. Replies
    19
    Views
    384

    Barometric pressure reported by your weather...

    Barometric pressure reported by your weather station is corrected. The one reported by your ECU is actual.
    You're after "station pressure" from your weather source if you can get it.
  5. Looks like Source Base is in your list. The Shift...

    Looks like Source Base is in your list. The Shift ID parameter will show the most heavily weighted table being used at the time the shift occurs. On some calibrations we also show the Upshift OSS and...
  6. Tom, Have you tried logging the Shift Source...

    Tom,

    Have you tried logging the Shift Source Base? That should show you if something outside of the Aggression maps were responsible for commanding the shift.
  7. The read supplied is a stock read matching the...

    The read supplied is a stock read matching the identified operating system.
    As well, without an MPVI2, you will be unable to even view the tune file, as it requires an MPVI2 and internet connection...
  8. Replies
    4
    Views
    398

    Its a possibility in the future, but no ETA at...

    Its a possibility in the future, but no ETA at this time.
  9. Replies
    5
    Views
    369

    Correct. Some of our competitors implement...

    Correct. Some of our competitors implement procedures designed to lock the ECU outside of their ecosystem. Not all of them do this, but some do, and in this case you ran into one of those.
    You'd...
  10. Replies
    5
    Views
    369

    This vehicle has most likely been previously...

    This vehicle has most likely been previously tuned with another software package. That is usually the cause of that.
  11. Im confused, did you read this from the vehicle?...

    Im confused, did you read this from the vehicle? We have a virtual read for that, itll match the stock file that was on that vehicle.
  12. Replies
    7
    Views
    449

    Do you have a ticket number I can take a look at?...

    Do you have a ticket number I can take a look at? If its unsupported at this time, I would think we'd be able to add it if its MED9.
  13. Replies
    7
    Views
    449

    Yeah get us an email at support@hptuners.com so...

    Yeah get us an email at support@hptuners.com so we can investigate. Thanks!
  14. This is supported in the latest 4.3 Beta....

    This is supported in the latest 4.3 Beta. Download it from https://www.hptuners.com/downloads/ and you should be good to go!
  15. Replies
    5
    Views
    759

    We're hoping to have this available in Beta very...

    We're hoping to have this available in Beta very soon. Currently ironing out some of the last few parts, so it shouldn't be too much longer.
  16. Replies
    7
    Views
    449

    Could you open a ticket with us at...

    Could you open a ticket with us at support@hptuners.com?
    Include any read (if you can get it) and an Infolog when connected to the vehicle and we can take a look.

    As well, be sure to be on the...
  17. Did they move you to a new software ID? We can...

    Did they move you to a new software ID? We can modify the calibration, but we do not have provisions to change the entire software ID. That said you can calibrate the new software ID to behave like...
  18. Replies
    63
    Views
    2,979

    Not every single operating system is defined...

    Not every single operating system is defined (especially considering Dodge pushes out new ones all the time).
    If you follow the instructions and get the file emailed into support, we can that...
  19. Well I just picked up an Escape, so I've been...

    Well I just picked up an Escape, so I've been putting the heat on Eric to get it added. Soon guys :D
  20. Replies
    3
    Views
    266

    Okay, so the axis was incorrect, but the curve...

    Okay, so the axis was incorrect, but the curve data itself is correctly mapped.
    I have fixed the definition for this. Closing and reopening VCM Editor should show the changes.
  21. Replies
    3
    Views
    266

    Yeah something is up with this. I'll take a look...

    Yeah something is up with this. I'll take a look and see if I can figure out what's up. It may be mismapped.
  22. No ETA at this time for Simos 16. Its in the...

    No ETA at this time for Simos 16. Its in the pipeline, but rough to say exactly when we'll be able to get it into Beta.

    Simos 8.5 is already supported with many defs available. If you have one of...
  23. We do not currently support that ECU, but I...

    We do not currently support that ECU, but I believe you should have a supported ZF8 Transmission with that.
    There are plans to add support for this ECU in the future, just not available at this time.
  24. Replies
    2
    Views
    287

    Hopefully this will give you what you're looking...

    Hopefully this will give you what you're looking for.
  25. Replies
    58
    Views
    2,144

    Would you be willing the post the file up? I can...

    Would you be willing the post the file up? I can take a look and see if I can provide guidance or realize if we left something out in error.
Results 1 to 25 of 158
Page 1 of 7 1 2 3 4