Hey guys, currently plugged into a ba xr8 , read and write works fine but the scanner has next to no pids , no throttle percentage , no knock retard and about 20 others missing .
Only have stft bank...
Type: Posts; User: TommyH
Hey guys, currently plugged into a ba xr8 , read and write works fine but the scanner has next to no pids , no throttle percentage , no knock retard and about 20 others missing .
Only have stft bank...
i think i saw one in the tune repository not long ago.
A guy that goes by the name Daniel Nagy, Headsex, Hstuning is probably the only one in Oz that has the 4 speed down pat. I know of a built btr that travelled over 100,000kms and ran 450rwkw and only...
where's the dyno sheet with the afr's? im very new and would like to see what afrs show up top with your demanded afr targets
Perhaps Tommy
To quicken up shifts would that be torque reduction upshift?
Max time 1-2 2-3 3-4
What tag is this under?
I had a na6 on the dyno and was not going past 180 @4800 rpm, i changed the vss limit 2 to 230 to no evail.
I would like some info on the btr stuff also , if anyone would like to share .
- Firm and quicker shifts
- increasing stall convertor
Thanks fpv for the tip
Hey guys i'm a newbie to tuning,i am tinkering with a ba at the moment and wondered why the flash time is 5 mins, if we could write calibration only instead of write entire wouldn't this quicken up...
or they perhaps don't have a answer
Australia
3rd gear