Search:

Type: Posts; User: Jeffrey Kavney

Page 1 of 5 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    74

    Add fuel in the torque to fuel mostly in high rpm...

    Add fuel in the torque to fuel mostly in high rpm works best for me and advance your injection timing a few degrees set the torque limiters off to let it fuel
  2. Replies
    17
    Views
    3,238

    I recently found an old sctx3 I have the X4 you...

    I recently found an old sctx3 I have the X4 you must of had unlocked tunes or am I missing something would be a nice work around as far as limp mode that?s my middle name Mine was mono mode holding...
  3. Replies
    17
    Views
    295

    i have forscan it?s pretty good for things like...

    i have forscan it?s pretty good for things like lights tanks size program injection codes and much better for diagnostic testing the lifetime membership was 50$ and like 15$ for the elm 327 hardware
  4. If some who has already used Winoles could chime...

    If some who has already used Winoles could chime in I believe it?s pretty pricey software
  5. I don?t think using a deleted tune will work like...

    I don?t think using a deleted tune will work like that unless it?s not tied to a vin Winoles will work with HPT to define what is what I know a guy who can do it PM me if it is something you are...
  6. Wow what a difference I was under doing it by...

    Wow what a difference I was under doing it by using stock configuration Jagerwrenching is the man
  7. What a difference I drove all day today with a...

    What a difference I drove all day today with a smile the whole time you?re the man big time 💪🏻👍
  8. I?ll email you the tune now!!! I found fuel temp...

    I?ll email you the tune now!!! I found fuel temp was set to stock and anything above about 80F would limit my torque I would greatly appreciate it
    I got a buddy who has been hinting around for a...
  9. I see what you mean now on my Lambda target...

    I see what you mean now on my Lambda target should I leave that alone till I get fueling down I have been meaning to upload my log file I had went through a break up last week and am disorganized...
  10. For sure I try to leave low mid throttle alone it...

    For sure I try to leave low mid throttle alone it would also shift weird on my last column of torque to fuel I?ve recently tried 120 mm3 at 600 Rpm and 130mm3 on but I?ve seen one # across the whole...
  11. Replies
    17
    Views
    295

    It?s does not work

    It?s does not work
  12. Replies
    17
    Views
    295

    I get same thing special function opens up but...

    I get same thing special function opens up but are blank I only have downloaded one version the beta is it possible I have a upload a different version
  13. Have you messed with maf?

    Have you messed with maf?
  14. It?s under (Torque Managment) (Driver...

    It?s under (Torque Managment) (Driver Demand)(TurboCharger) (exhaust brake)
  15. Sounds good tell you the truth I don?t know if I...

    Sounds good tell you the truth I don?t know if I even needed to adjust the pulse I?ll send that this afternoon
  16. I was looking at that table believe it or not I...

    I was looking at that table believe it or not I used an old tune I to compare didn?t find for sure issue but the old tune with my new way of fueling was pulling nice I got up to about 850* F with...
  17. What do you want to know the lower the # in...

    What do you want to know the lower the # in negative -37 the stronger the brake. -47 is more
  18. Thread: 06 lbz

    by Jeffrey Kavney
    Replies
    8
    Views
    196

    Can you still disable I know it?s pre DPF I read...

    Can you still disable I know it?s pre DPF I read that last update ended all of that
  19. I had set my Torque monitor of RPM to 4500 it?s...

    I had set my Torque monitor of RPM to 4500 it?s says anything below this # torque is not monitored so I set it to max the truck wouldn?t rev over 1400 RPM I went through the scanner yesterday and...
  20. Lol voice to text I have been working on setting...

    Lol voice to text I have been working on setting up my scanner I?ll let you know what I find or I?ll post my data log
  21. I?m only hitting 12* at 3500 RPM I kept hitting...

    I?m only hitting 12* at 3500 RPM I kept hitting torque modules error when I hit high RPM with anything more than about 14* my Torque factor was set to 1.44 in some areas in factory settings I am...
  22. I am getting a haze at idle I need to figure out...

    I am getting a haze at idle I need to figure out about how many G/S the truck is using at around 1000 RPM and max it from there on up I?m getting much more fuel now my EGT is almost 150* hotter that...
  23. I appreciate it man I am fairy new to tuning...

    I appreciate it man I am fairy new to tuning especially the transmission I had copied the tow haul for shift speeds to keep from lugging I didn?t know that low range 4x4 kept the TCC locked Good...
  24. Replies
    2
    Views
    157

    There is clutch on on downshift raise the psi or...

    There is clutch on on downshift raise the psi or the lbs/s is in time/ torque there is plenty on this in the forum I Have a ford 6R140
  25. I was getting a wired dead pedal last night I am...

    I was getting a wired dead pedal last night I am going to try again today truck was definitely fueling until I tried to get on it one time
Results 1 to 25 of 108
Page 1 of 5 1 2 3 4