Search:

Type: Posts; User: IARLLC

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    9
    Views
    490

    The valve body is interchangeable between pretty...

    The valve body is interchangeable between pretty much all of the 8 speeds from 15-17. There are flow differences from solenoid to solenoid so they want them registered with the TCM but it is not like...
  2. Replies
    1
    Views
    109

    The reset is not directly linked to installing...

    The reset is not directly linked to installing your tune. You just do the reset in order to start the trans learning over after you make the changes and of course to get the affects of your changes...
  3. Replies
    15
    Views
    846

    Evan, I just want to say thanks for taking care...

    Evan,
    I just want to say thanks for taking care of this. Sorry I was not very patient.

    It all worked out fine.
  4. Replies
    9
    Views
    490

    I don't know if there are mechanical differences....

    I don't know if there are mechanical differences. I kinda doubt it given the motor. Maybe there are some mechanical changes compared to the truck L86 because of rpm range or something but between...
  5. Replies
    15
    Views
    846

    That is great! Thanks so much! I will open it...

    That is great! Thanks so much!

    I will open it tomorrow morning.
  6. Replies
    12
    Views
    337

    Well you did spell it out first. Good job. You...

    Well you did spell it out first. Good job. You found the correct answer and helped.

    Yesterday I thought about telling him (serial cycling) but I had already given him the answer if he had just...
  7. Replies
    12
    Views
    337

    The fan patch that I posted that says, "Copy...

    The fan patch that I posted that says, "Copy settings from System Fans and AC and Engine Idle Airflow Fans"...........................
    Well if he read the extremely simple...
  8. Thread: L83/6l80 help

    by IARLLC
    Replies
    26
    Views
    1,011

    P0102, MAF low output makes sense for the 4"...

    P0102, MAF low output makes sense for the 4" tube. If you just follow the write-ups for MAF tuning you will probably resolve that and have a much better running engine.

    The logs show that this...
  9. Replies
    12
    Views
    337

    https://forum.hptuners.com/showthread.php?63885-04...

    https://forum.hptuners.com/showthread.php?63885-04-silverado-Elec-fan-conversion-trouble&highlight=efan

    96676
  10. Replies
    9
    Views
    490

    I have heard of it being done. People that tried...

    I have heard of it being done. People that tried the Corvette settings in other rigs say that it shifted so much faster that the trans would bind up. Maybe running on the Vette OS will get rid of the...
  11. Replies
    15
    Views
    846

    HI, Evan. I still have not heard from support. I...

    HI, Evan. I still have not heard from support. I downloaded the latest beta. Should I just call to have the car dropped off and try to read it again?
  12. Thread: L83/6l80 help

    by IARLLC
    Replies
    26
    Views
    1,011

    P0102, MAF low output makes sense for the 4"...

    P0102, MAF low output makes sense for the 4" tube. If you just follow the write-ups for MAF tuning you will probably resolve that and have a much better running engine.

    P0650 just means that you...
  13. Replies
    9
    Views
    490

    If I remember correctly (which does not happen...

    If I remember correctly (which does not happen very often) the Camaros receive their paddle orders via can message from the BCM while the Vette has the paddles wired directly to the TCM. So if you...
  14. Replies
    15
    Views
    846

    Awesome, Evan! I will download the newest beta...

    Awesome, Evan! I will download the newest beta and look forward to hearing from support.
  15. Replies
    2
    Views
    156

    BARO tells us how much pressure is on the outside...

    BARO tells us how much pressure is on the outside of the motor. It is based on this statistic that the PCM has to figure out how much to expect inside the motor when certain things happen. I am not...
  16. Replies
    10
    Views
    639

    Awesome! Please let us know how it goes. Q50...

    Awesome! Please let us know how it goes. Q50 sitting in my shop wishing for better calibration.
  17. Thread: C7 Burble tune

    by IARLLC
    Replies
    3
    Views
    206

    https://forum.hptuners.com/showthread.php?77120-Qu...

    https://forum.hptuners.com/showthread.php?77120-Question-on-Hp-tuners-DFCO-CFCO-2016-camaro-2SS-M6-Need-more-burble-pops-on-dece&highlight=pops
  18. Thread: L83/6l80 help

    by IARLLC
    Replies
    26
    Views
    1,011

    Yeah, kevin87turbot gave you a real gift. He...

    Yeah, kevin87turbot gave you a real gift. He already made a number of helpful changes to make it respond better and run stronger.

    You will still need to figure out what is happening with the MAF....
  19. Thread: L83/6l80 help

    by IARLLC
    Replies
    26
    Views
    1,011

    Code is probably a P0101. MAF not reading what...

    Code is probably a P0101. MAF not reading what the calibration thinks it should. If that MAF is intalled in the 4" intake tube, the speed of the air is much lower than it was going through the...
  20. Replies
    20
    Views
    573

    Like mbray01 wrote, people have already taken the...

    Like mbray01 wrote, people have already taken the time to write everything that you need for tuning that vehicle. In order to do a good job tuning it you will need to search and read quite a bit....
  21. Replies
    20
    Views
    573

    "good-for-nothing VE tables"? Somebody does not...

    "good-for-nothing VE tables"? Somebody does not understand how they work! If you understand why they exist and how they work you can not call them "good for nothing". Saying things like that give...
  22. Thread: Vehicle list

    by IARLLC
    Replies
    4
    Views
    245

    Sometimes you can scan it and send the file. They...

    Sometimes you can scan it and send the file. They are pretty good about adding GM stuff.
  23. Replies
    15
    Views
    846

    Me too. I've got a 2018 Q50 sitting in my shop...

    Me too.

    I've got a 2018 Q50 sitting in my shop waiting for some fun but I need to take care of this 2012 Juke/Joke/Rogue or whatever it is first... Hopefully it will all work out pretty soon.

    A...
  24. Replies
    15
    Views
    846

    Thanks for responding. 201565

    Thanks for responding.
    201565
  25. Replies
    15
    Views
    846

    Hi Evan, Is there any hope for my customer's...

    Hi Evan,
    Is there any hope for my customer's Nissan?
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4