Search:

Aem is working with today's build

the heads are the easy part i droped the oil pump bolt into the pan i had to fish it out with a magnet lol. Make sure you turn off dod before you start it up also otherwise it will try and cruise in...

What is the year make and model?

Me and my dad run a shop we do mainly diesel work but we get some gas work also.. i did the cam swap in 7ish hours i can get you a printout from alldata if you need anything.. does the maggie have...

Im using 93 with ethonal mix its all we have. The timing table im using in that scan and tune is a smoothed stock file im just geting started on it thats why there is kr,i didnt like the way my other...

I cant find the pe/cot spark table, so these motors run better on the richer side when i get the wb ill see if that helps thank you

It shifts pretty good nice and quick but its a lil to harsh.it uses another table for the shift times thats why i zeroed that table out. i got that from the tuning school.

my fuel trims cruising...

yes the weather was alot different the 12.9 without the cam was in the winter it was atleast in the 70s. with the cam it has been in the 80s with 90% hummidty. Would a rich a/f ratio slow my trap...

Im trying to tune my g8 but i belive im missing a few things. to start off the car has longtubes,varram intake,cam 222 226 596 598 115+3,and no cats. before i added the cam it ran a 12.9 @109 with...

im tuning the air fuel on a g8 gt. im new to the v8 world. what exactly do i have to do to tune it? do i just put it in open loop? and do i need to set the pe to somthing before i begin?

Im trying to tune the air fuel on a 07 g6 with a 3.5 and i cant get the histo to work.. i keep geting unsuported parameters. im using a lm1 wideband.

I got it to work the computer i was using to program the lm1 must of not been compatable i used a computer at work and reprogramd it and it worked perfectly thank you for your help. =)

Im using the lm1 not lc1 and im using my own user defined EIO PID.

Thats were im having the problems to get close i have to add 3 or more and then it doesent go lower the 13afr.

I have my my lm1 programed like this 0v = 10 afr 5v = 18afr I just cant get hpt to read corectly, i would appreciate any help :pray: