Hi everyone,
I am a newb to all of this tuning. I have a 2007 9-7x with a BTR Stage 2 truck cam(212/218 .553/.553 111+0), longtubes/off-road y. and DOD delete. I have started playing around with the tune, tuning out the rear oxygen sensors and the p0300 misfire code. As far as actual tuning, I have only messed with idle rpm. I have attached the tune file and a scan file of it warm and riding around a little bit. Please let me know whatever suggestions you may have. Thanks!
Got some time to take it out today. Still have some hiccups and really need to figure out shift points and air/fuel/spark optimization. I also found that my B1S1 is not working either so that shows on the scan. Any input is welcome. Thanks
latest data log. changed tune after. will upload that log tomorrow.
22-11-28 20-12-30.hpl
You need to max the misfire timers out.. Turning off p0300 isn't a great idea. conditions of that code can still be active like no TCC lockup.
Tuner at PCMofnc.com
Email tuning!!!, Mail order, Dyno tuning, Performance Parts, Electric Fan Kits, 4l80e swap harnesses, 6l80 -> 4l80e conversion harnesses, Installs
Reply With Quote