Results 1 to 5 of 5

Thread: VVT Monitor 6.4

  1. 11-30-2022 #1
    Nofun
    Nofun is offline
    Tuner in Training
    Join Date
    Nov 2022
    Posts
    10

    VVT Monitor 6.4

    First post.

    I have a forged 392 with a gen 5 whipple. Runs fine no CEL, however I cannot get the VVT/EGR monitor to set so that I can pass smog. I attached my current tune and I am wondering if the VVT tables are the cause. Thank you
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  2. 12-01-2022 #2
    Nofun
    Nofun is offline
    Tuner in Training
    Join Date
    Nov 2022
    Posts
    10
    Can someone give a log from a stock 6.4 so I can see what the cam angle is while driving?
    Reply With Quote Reply With Quote
  3. 12-01-2022 #3
    white1
    white1 is offline
    Advanced Tuner
    Join Date
    Oct 2005
    Location
    baton rouge la
    Posts
    411
    Any specific year you're looking for?

    2022 scat charger stock.hpt
    Reply With Quote Reply With Quote
  4. 12-01-2022 #4
    Nofun
    Nofun is offline
    Tuner in Training
    Join Date
    Nov 2022
    Posts
    10
    As long as it is a srt 6.4 with a A8 I think I am good, thanks
    Reply With Quote Reply With Quote
  5. 12-02-2022 #5
    Nofun
    Nofun is offline
    Tuner in Training
    Join Date
    Nov 2022
    Posts
    10
    Ok, my smog journey in CA has not been fun and is still a work in progress. I returned all the VVT tables to stock and the monitor set in one drive cycle, but now I have to drive it 200 miles and do 15 cold starts before the state system will ignore the terminate code in the PCM for the thermostat
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »