Results 1 to 6 of 6

Thread: E38 vats off

  1. #1
    Tuner in Training
    Join Date
    Aug 2020
    Posts
    11

    E38 vats off

    Hey guys, is there anyone that may be able to help with a Delco E38 Vats off, the HPT Vats patches dont work. Can send unencrypted read of flash and eeprom, flash file is too large to post to forum.
    2014 Camaro,Gen 4, 6.2SS, operating system 12656198
    thanks

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,564
    Are you doing a write entire for the VATS removal?
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Tuner in Training
    Join Date
    Aug 2020
    Posts
    11
    yes

  4. #4
    Senior Tuner
    Join Date
    Jun 2004
    Location
    405
    Posts
    2,320
    I don't know what software version you are using but you might want to read this thread to the end to see what the final solution was.

    https://forum.hptuners.com/showthrea...181#post704181

  5. #5
    Senior Tuner TheMechanic's Avatar
    Join Date
    Jan 2014
    Location
    SoCal
    Posts
    1,559
    Most likely you didn't do the Starter Diag
    System>General>Starter Relay>Starter Diag> set to "Disable"

  6. #6
    Advanced Tuner
    Join Date
    Mar 2020
    Posts
    380
    Find an online download for 4.8.7 version, and use it. It will work