Tahoe 2008 disable ABS and Traction Lights
Hello ,
I'm new on Hptuners , i have Tahoe 5.3 2008 and cancelled the ABS and the 4x4 Trans and looking for Disabling the ABS and Traction Lights , is this something to be done under Engine Diag or Trans Diag and which DTCs to be tackled, your help will be much appreciated.
Not something done with HP Tuners.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Thanks for the feedback Sir, may i request more elaboration on the provided picture.Originally Posted by blindsquirrel
The BCM is requesting ABS/Trac light on because the ABS module has been removed and is no longer able to send messages to the BCM, and HP Tuners does not read or write anything inside either of those modules. It's powertrain-only.
Desoldering iron. Re install cluster
how to disassemble for the new guy.
https://youtu.be/xwwT_b9kaGU
Last edited by TheMechanic; 12-10-2022 at 02:58 PM.
Swatch of electrical tape?
There were rumors back in the day that the used car lot guys would turn out warning lights using a red-hot scribe, melted through the face of the cluster to poke the bulb out. Though I never saw evidence of that having happened myself.
Reply With Quote