I have a built 426 with a magnusson 2300 SC, built and tuned in Utah at elevation on 91 octane. Now on the east coast (Maryland) and would like to have the tune gone through with 93 octane and sea level.
I have a built 426 with a magnusson 2300 SC, built and tuned in Utah at elevation on 91 octane. Now on the east coast (Maryland) and would like to have the tune gone through with 93 octane and sea level.
I can help, [email protected]
Thank you
www.n2speed.com
http://www.amp4x4.com
[email protected]
Dodge And GM Tuning Suppport
Diablosport CMR | HP Tuners
PM sent.
we can support this and dial it in for you. saywhentuningandperformance.com
6.1 based 426 stroker fully forged 11.5:1 compression.,Thitek CNC 6.1 Heads, RLD H5 Camshaft, Edelbrock Victor II intake manifold, Hellcat cnc ported TB, FIC 725 cc/min injectors, Legmaker CAI, UPR catch can, BBE 3in exhaust, 3k stall converter , Paramount Nag1, 1K Hp driveshaft and axels, Wavetrac LSD. 400 shot laughing gas on progressive controller. Fore dual pumps with fc3 controller.