Results 1 to 2 of 2

Thread: plotting not showing for certain channels

  1. #1
    Potential Tuner
    Join Date
    Dec 2022
    Posts
    2

    plotting not showing for certain channels

    I searched to no avail.

    problem: I see some channels plot, like speed, RPM but not for Shift Solenoid Pressures (and others) as shown in the screenshot below.

    The same channel in a gauge works, but I need graphs to compare against other pressures.

    Are some channels not able to be plotted/graphed or do I need to enable something for the channel to make it plot.

    Thanks for help...


    chart.jpg

  2. #2
    Potential Tuner
    Join Date
    Dec 2022
    Posts
    2
    I solved the above issue.

    I had to populate the 'Max Limits' with a value in the channel