Results 1 to 3 of 3

Thread: Resync failure/trust issue

  1. 12-20-2022 #1
    Beserker
    Beserker is offline
    Potential Tuner
    Join Date
    Dec 2022
    Posts
    1

    Exclamation Resync failure/trust issue

    Im trying to resync interface on my mpvi3 but I keep getting a resync failure/trust issue.

    It was because I was using a network that is monitored.
    Last edited by Beserker; 12-20-2022 at 05:41 AM. Reason: Resolved
    Reply With Quote Reply With Quote
  2. 12-20-2022 #2
    BPella
    BPella is offline
    Tuner in Training
    Join Date
    Jan 2020
    Location
    Tampa Florida Area
    Posts
    27
    Set your phone up as a hotspot then connect mpvi3 computer to the phone hotspot. That will bypass the monitored network. (There will be a monitored network rule to prohibit going to an unauthorized IP address causing the failure) This works if your phone is hotspot capable.
    Bernie Pella
    [email protected]
    Reply With Quote Reply With Quote
  3. 01-28-2023 #3
    Dynomite Tuning
    Dynomite Tuning is offline
    Potential Tuner
    Join Date
    Jan 2023
    Posts
    1
    Did the unit have a red light on the host? My 2 is having same issue and has steady red light on and I can't submit a ticket because the link opens up an error page on every way I try to open it. Was in the middle of loading a file into a customer's car and all sudden lost communication and will not resync with a failure connect customer support error message.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »