Hey guys I'm looking for tips on traction control for my 2012 Camaro SS Automatic. I'm putting out 455 whp and 430 wtq with a 3600 stall converter and can't figure put how to get any darn traction at all. Now I know tires matter a lot. I have the BF Goodrich sport comp 2's with 305's in the rear and they are kind of hard at a 400 tread wear and leave a lot to be desired. I have the TCS method set to spark only and the max torque set to 525. I've tried reducing the max torque all the way down to 200 and quickly found out that definitely doesn't work and then I tried lowering the active dc min value to 20% and still nothing. I mean is this it for traction control on these cars or do I need to enable ETC on the method? Now another thing I was thinking about was the minimum spark and under torque management I only have it set at 5*, do I need to go to the stock setting of -20*? Because I noticed that when traction control is enabled it goes right to 5* and stays there until I get traction. Thanks for your time.