Results 1 to 2 of 2

Thread: XR6 Turbo cuts power at 4000 RPM

  1. #1
    Potential Tuner
    Join Date
    Dec 2022
    Posts
    3

    XR6 Turbo cuts power at 4000 RPM

    Hi all, I am new to tuning. I have done a heap of mods on my XR6t BF MK2 including increasing boost and bigger turbo, full exhaust, 1000cc bosch injectors, hot and cold side and intercooler upgrades etc.... My issue is, I had it tuned to get it going again and when deriving easy to moderate, it goes fine but when i push the throttle hard, it does a hard cut out at 4000rpm and nearly puts me through the windscreen. I think it feels like the ecu thinks its over boosting because of the increased 16lb boost or perhaps a torque management issue. Can anyone help me get around this. It has heaps of power about 363KW on dyno but on the road i cant drive it the same because it just shuts off everything power wise at 4K?

  2. #2
    Potential Tuner
    Join Date
    Dec 2022
    Posts
    3
    It's very quite on here these days.....

    Tumble weeds in fact.

    Post the tune and a log that would be the easiest way for anyone to have a look and help.