B8 2.0T Exhaust Cam Control

[DylanC]

Anybody know if there is a way to modify the exhaust cam valve lift solenoids set point RPM?

I've attached pic of the intake cam control for the variable timing of the cam gear, but I can't see anything related to the exhaust cam.

Thanks!

Variable Intake Cam HPT.png

Variable Intake Cam 2 HPT.png

[TylerJDubbs]

I could try and find it in UDP but I haven't seen it defined in HPT yet

[DylanC]

Thanks Tyler

[TylerJDubbs]

Thanks Tyler

Do you have UDP?

[DylanC]

I don't. Am I crazy or do I feel it at 3200'ish rpm?

[katyswift468]

The magic is in the control valve in the end of the intake cam shaft and the VVT mechanism

mapquest directions

[DylanC]

The magic is in the control valve in the end of the intake cam shaft and the VVT mechanism

mapquest directions

Hard say unless the exhaust cam lift timing point can be adjusted to see. The intake cam vvt is nice to have tho I agree!

[SuperG5]

Hard say unless the exhaust cam lift timing point can be adjusted to see. The intake cam vvt is nice to have tho I agree!

Look what i found digging for 2.0 tfsi stuff. https://www.youtube.com/watch?v=gWrrS4FoAQI .. large and low lift . but software says intake cam angle etc? i can physically see the lift solenoids on the exhaust side of the block. but i dont think i see those parameters on my file.

[b99999k]

thank you b