Burbles + Flame simos18.10

[flamingsn3Ak3r]

Hi guys I need some advice to do pop bang with flame like in this video at 2:02 min https://www.youtube.com/watch?v=zxpW...nnel=DmitryVAG
Basically i have activated by vcm editor:
- all burble logic (enabled with switch and clutch state)
- duration (5 seconds)
- Delay stock to 0
- spark advance to -35? in the area of cut off (all limiter moved to -35? too)

vcm.JPG

now i have a loud and powerful Bang with big flames but they are not continuous like in the video above.

I've tried to touch DFCO rpm limit but pop stops even if fuel are not closed (consumes not goes to 0 after car decelerate)
stock DFCO are:

Cattura.JPG

Somebody can help me to achive this result?

Thanks

[betopadilla90]

Can you show me how you made the map in spark?