Page 2 of 2 FirstFirst 12
Results 21 to 25 of 25

Thread: OSS tables description

  1. #21
    Tuner in Training
    Join Date
    Feb 2021
    Posts
    41
    I PM'd you

  2. #22
    Advanced Tuner
    Join Date
    Jan 2022
    Posts
    882
    thx for that

    you know if htp has a tune depository?
    [email protected]

    don tanklage

  3. #23
    Tuner in Training
    Join Date
    Feb 2021
    Posts
    41
    Don't know....

  4. #24
    Advanced Tuner
    Join Date
    Jan 2022
    Posts
    882
    Quote Originally Posted by DodgeBoy_8HP View Post
    Joe,
    If you want to do the "half a**" way, just set the table to 6500 rpms engine to all gear (do the math to enter OSS)
    Dodge Boy
    What other way is there?
    [email protected]

    don tanklage

  5. #25
    Tuner in Training
    Join Date
    Feb 2021
    Posts
    41
    Here is a snip from the one log that i had of the very first 2-3 and 3-4 WOT with the stock 1320 trans tune. It appears the OSS table didn't bother it. Great.
    2-3 was 501ms and 3-4 was 205ms.

    Engine torque reading feeding the HP70 trans was 630-635 ft/lb in track mode and I am guessing it was accessing the sport clutch tables and the sport torque reduction tables the latter of which are 0'd out at high load. So this is old-school just send the clutches against the full engine torque. Which aint good for longevity probably in my case making more power than stock.. .

    That's the report
    Attached Images Attached Images