Asking if one of the tuning experts would take a look at my scan to see if any improvements can be made.. Thanks in advance.
Asking if one of the tuning experts would take a look at my scan to see if any improvements can be made.. Thanks in advance.
Hello friend, do you want to see if the car can improve even more? surely yes
I am seeing that it can improve much more, send me a message to my whatsapp that is below and we will talk better but if it improves a lot, it lacks more power
?+58 4149648393
[ATTACH=CONFIG]127783[/ATTACH,
Last edited by Josue Galban; 01-24-2023 at 02:12 PM.
alot of power to be had for sure.
Follow @MASTUNING visit www.mastuned.com
Remote Tuning [email protected]
Contact/Whatsapp +966555366161
Post up the tune, and we can look at it.Originally Posted by tkemp
Fuel trims look good,
No Knock Voltage being logged, Need to log it, need to know how it's reacting to timing and engine load.
No VE being logged, no air flow.
Also it's runs hot, do yourself a favor , before you lay out any money to get a "better tune"............ get a 180 degree thermostat.
62 Biscayne 425/409 SS/D stock class car 10.60s
66 Dart 426CIG3 8.60@171 2750lbs Naturally asperated
04 Ram All Alum , 468Ci G3 10.50s @4800 lbs Naturally asperated
04 Rumble Bee, built 6.1 ,4000lbs 10.48 @ 129s MPH. Naturally asperated
05 Rumble Stock 5.7, 3.92s TUNE ONLY 13.94@98mph
Latest Tune file... any help or advice is greatly appreciated.
Pretty sure its running lean and seeing lots of knock on wot pulls, thats why spark is barley topping 7 degrees about 5200 5600 rpm and pratio and aircharge numbers look low
Just my 2 cents
definitly log st and lt knock and fa ratio and post another log
Thanks Rays04/// 180 thremo is on order.
You need to add a few things to your scanner channel.
Aircharge
Volume Metric Effeciency
knock sensor voltage 1 & 2
Spark Knock
Reply With Quote