08 GPEC ECU Aircharge

[darens]

I am needing help on getting the math to be able to log aircharge/ mg/stroke/g/stroke. HP does not support this output into the scanner. The only PIDs that i have that might be able to get me the correct formula is Pratio, Map, IAT, and RPMS. I am needing something to log to be able to do my timing, and fueling maps.

[N2speed]

Gpec was not around in 08 I believe, need to log Pratio, LT Fuel Trims and RPM.

[darens]

08 Caliber Srt and some STX manual vehicles has a Gpec Ecu. All of the spark maps are MG/Stroke over RPM. So just logging Pratio and Rpm is not going to get me there.

[CaliberGuy05]

Hello i have been having this same problem for the last year : (. i have the 07 caliber se

[rays04gtx]

Have you guys tried Support to see if you can get those added ?

https://forum.hptuners.com/showthrea...er-srt4-tuners

https://forum.hptuners.com/showthrea...rsion-to-g-sec (not to sure about this one.....his set up never gave me what I wanted)


Not sure if this is the math you guys need, but

[darens]

I am unable to log 2313 or any type of air charge. Support stated that they are unable to add any more logging parameters

[CaliberGuy05]

I am unable to log 2313 or any type of air charge. Support stated that they are unable to add any more logging parameters

same. i asked as well