Results 1 to 14 of 14

Thread: CANT DOWNLOAD Beta Software

  1. #1
    Potential Tuner
    Join Date
    Nov 2020
    Posts
    4

    CANT DOWNLOAD Beta Software

    hey guys


    any other source to get the 5.1 beta suite software as the hptuners link for this is having issues with the host with no eta


    thank you very much

  2. #2
    Potential Tuner
    Join Date
    Feb 2023
    Posts
    2
    I'm having the same issue.

    also having a polling issue now. super disappointed in the lack of a number to call after spending so much money

  3. #3
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,394
    beta download seems to be working now.
    We got this guy Not Sure, ...

  4. #4
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    6,736
    Just got a contact your vendor message when I tried.
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC

  5. #5
    Potential Tuner
    Join Date
    Feb 2023
    Posts
    2
    https://dotnet.microsoft.com/en-us/d...-x64-installer your welcome lol. download this first then try and redownload it. i git that link from the support team.

  6. #6
    That link is on the HP site directly below the beta download.

  7. #7
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    6,736
    Yeah and not supported by all computers - thanks for that... Waiting to hear if there's an alternative. Says I need x84 instead of the x64?
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC

  8. #8
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,394
    Quote Originally Posted by GHuggins View Post
    Yeah and not supported by all computers - thanks for that... Waiting to hear if there's an alternative. Says I need x84 instead of the x64?
    What's your computer specs?
    We got this guy Not Sure, ...

  9. #9
    X86? If so, here's the main link to dotnet 6.0: https://dotnet.microsoft.com/en-us/download/dotnet/6.0

    Here's the direct link to x86 desktop: https://dotnet.microsoft.com/en-us/d...-x86-installer

    I have no idea if it will work since every computer I use needs the x64 dotnet version.

  10. #10
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    6,736
    Thank you OhTwo. I downloaded it - should have known to back up a page or two from the download center to find the other one, but still a no go. Still get the same message when I go to open the beta software.

    Attaching specs image. Yeah, I know - it's old, but been using the same computer with minor upgrades for tuning and everything else for the last 11 or so yrs and then a different one for mobile services. Prefer this one as it's easier to use in general.
    Attached Images Attached Images
    Last edited by GHuggins; 02-02-2023 at 06:02 PM.
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC

  11. #11
    Senior Tuner
    Join Date
    Jan 2014
    Location
    Australia
    Posts
    1,970
    mine says i need to install run desktop runtime6 x64 to be able to install beta

  12. #12
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,394
    Quote Originally Posted by GHuggins View Post
    Thank you OhTwo. I downloaded it - should have known to back up a page or two from the download center to find the other one, but still a no go. Still get the same message when I go to open the beta software.

    Attaching specs image. Yeah, I know - it's old, but been using the same computer with minor upgrades for tuning and everything else for the last 11 or so yrs and then a different one for mobile services. Prefer this one as it's easier to use in general.
    VCM Suite is now 64 bit and will not run on 32 bit operating systems.
    We got this guy Not Sure, ...

  13. #13
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    6,736
    Figured it was going to be something like that. It's worked fine until this update. Going to have to go back to using two different computers for remote tuning. That really sucks.


    On a side note. Does anyone have an older version of beta saved that didn't require all of this? My version is the early one that torque editing didn't work on and short of making a trip to get me other computer I would like to have the most recent version that didn't require all of this new BS... Thank You. I can load the latest stable I guess, but would rather have the beta.
    Last edited by GHuggins; 02-02-2023 at 08:34 PM.
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC

  14. #14
    Advanced Tuner
    Join Date
    Aug 2020
    Posts
    335
    Forgive me if I missed it, but beta or not a switch to 64 bit is something that should be announced by noting it somewhere prior to or simultaneously with release in the release notes.