Results 1 to 7 of 7

Thread: l83 stage 2 cam

  1. #1
    Tuner in Training
    Join Date
    Feb 2023
    Posts
    31

    l83 stage 2 cam

    i need someone's help please I've taken my truck to a lot of tuners but nobody is able to tune it right i have a 2015 Silverado 5.3 stage 2 texas speed cam with phaser lockout upgraded springs pushrods , have short headers cold intake and no cats but my truck wont sound cammed at all its like if the engine was stock basically



    Attachment 128404Attachment 128405Attachment 128404Attachment 128405Attachment 128404Attachment 128405

  2. #2
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    6,802
    Hard to tell with your logs since all you posted were driving logs, but where it was idling the timing and idle rpm looked wrong. You have both negative timing at slow speeds and high idle and then high timing at what I assume is regular idle - again hard to tell. It's supposed to idle at 775 - even though all the tables aren't setup for this which on it's own is pretty high to get a good lope - DI engines can idle just about anywhere with a cam - doesn't have to be raised up. Your adaptives look OKish. You can raise reserve and external load, but inevitably going to be in the torque model.

    Would be best to get a long idle cold start then quick drive while coming to a stop and idling in gear for a couple of minutes and then back to the house and let idle hot in park. Also make sure to add in all of your requested and delivered torque channels.
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC

  3. #3
    Advanced Tuner
    Join Date
    Apr 2017
    Posts
    311
    I have the same cam in my 6.2. I'm not tuner but I got mine chopping fairly good now. I can show you what I did and let the real tuners tell me if what I'm doing is wrong. But it drives good and sounds good now. It might be later today before I can post back.

  4. #4
    i have the tsp l83 stage 1 cam in my 2015 6.2 sierra and would also like to compare the tune. i have been trying to get a good chop for a while now.

  5. #5
    Tuner in Training
    Join Date
    Feb 2023
    Posts
    31
    yes please sorry for late response computer was getting repaired

  6. #6
    Tuner in Training
    Join Date
    Feb 2023
    Posts
    31
    ill post my tune and idle log

  7. #7
    Tuner in Training
    Join Date
    Feb 2023
    Posts
    31
    here they are