I purchased a 2010 Camaro SS with k1 Pistons, Texas Speed stage 2 turbo cam (VVT Delete), Huron Speed 7875 turbo kit and Circle D 3400 stall. The car has FIC850 injectors, ADM Controller and ZL1 pump and tuned on E85. The car pulls ok, but on my first run with it, the headers were glowing like crazy. I decided to park the car in the shop and order an AEM gauge to see my AF ratios. However, I plugged in my HP Tuner and read the tune with quite a shock of what I saw. The timing is way off, VVT is still on, and I am pretty sure the injector data isnt correct. I posted my original tune that the car had when I got it and what I have been doing. I could really use some help with injector data and whether I should continue heading towards speed density or not. Any help would be awesome, I am just starting to get into HP tuners.personal2010turbo6.2SpeedDenVVTOFFInjData-4spark.hptpersonal2010turbo6.2originaltune.hpt