Redline LED's?

[TheDrill]

I've already paid for the User Defined Parameters. I think my end goal is to be able to sufficiently make a DP tune, which was the main basis of getting the PCMflash software/hardware and the openport as well. I have a very long way to go though haha. The base offset makes a lot of sense as well. I've been using the winOLS demo for about a week to dig into a few random bins, and overall just learn how things are laid out, making changes, etc.

Do you have any other tips for someone who is super new to the hex/winols mappack based side? Thanks for all the help, I'd send you a beer if I could

If you have already paid for the User Defined Parameters, you can use this Xdf to modify the cluster speeds, Im not going to spoon feed you but this is a start to add extra parameters to.

[Only6NoTricks]

I appreciate you Drill! I respect your work on this platform.

Edit: The base offset was a character off, here is the updated one.

2013 audi A8 cluster updated.xdf

[aaronc7]

My direct knowledge is only simos18 specific, but if you buy a winols mappack/OLS file you can then manually create the XDF from that info...the file will have many maps defined with all detailed defined. This is probably what you're looking at most realistically to add a few maps here and there and not too much $ or time invested. Places like nefmoto are probably a good place to start looking to buy mappack/OLS file or similar. WinOLS has an export to XDF feature but you need paid WinOLS + XDF feature....at that point you'd probably just be editing files in OLS anyways.

[Only6NoTricks]

A friend of mine does have winOLS, so I could utilize that. Time isn?t too much of an issue but money on the other hand? Lol

[aaronc7]

Free version of WinOLS will let you open OLS files and do what I described above. Free version you can't save edited bin files is the big limiting factor.

[Only6NoTricks]

Free version of WinOLS will let you open OLS files and do what I described above. Free version you can't save edited bin files is the big limiting factor.

I?ll probably do most of the editing on winols, then every so often utilize his subscription. Thanks for all the help!

[Only6NoTricks]

@TheDrill as promised: https://drive.google.com/file/d/1c1k...usp=drive_link

Looking at it a bit further, it appears that my 4H bin would be the same as the 4G bin if im not mistaken...

[TheDrill]

@TheDrill as promised: https://drive.google.com/file/d/1c1k...usp=drive_link

Looking at it a bit further, it appears that my 4H bin would be the same as the 4G bin if im not mistaken...

Thanks for that , I was pretty sure it was the same as my 4G once I discovered the cluster address's were the same.
Your 4G bin lines up perfectly with my XDF, with a few differences here and there on the torque maps ect.

[Only6NoTricks]

Thats awesome. Are you on revision 0005 too?

[TheDrill]

Thats awesome. Are you on revision 0005 too?

When I got the car it was on revision 0007 and I updated to the latest revision of 0010.

[Only6NoTricks]

Weird, 0005 is the highest version i can update to.

[ELaw]

Here's my file...

[Only6NoTricks]

@Elaw here is 7k for youA6 tune 2.9 lil milder 7k leds.hpt

[ELaw]

Perfect... thanks so much!

[Only6NoTricks]

Happy Holidays!