Results 1 to 4 of 4

Thread: 68 RFE converter 3rd gear locking, unlocking, relocking, then 3-4 shift.

  1. #1
    Tuner in Training
    Join Date
    Nov 2020
    Posts
    15

    68 RFE converter 3rd gear locking, unlocking, relocking, then 3-4 shift.

    Working on a 2014 ram 2500. Under moderate throttle the TCC locks from 3rd -6th without issue.(part locks during shifts , which i am fine with), but as soon as i am like 45%TPS or more, the 2-3 shift happens, TCC locks in 3rd, then it unlocks and then it relocks, then 3-4 happens, locks up right after shift and acts normal for the rest of the shifts.

    it seems to only unlock in 3rd under some kind of load or heavier throttle demand. Any pointers to make it stop doing that and just remain locked. I tried lowering the part lock ups and part to lock tables with no luck.

    I want to keep part locks for sake of a cushion on the trans cause the truck has 37's on it. Just want 3rd to lock and stay locked under heavier Throttle

    Thanks !

  2. #2
    Tuner
    Join Date
    Aug 2021
    Location
    Indianapolis Area
    Posts
    172
    Could you share the tune & log?

    DodgeBoy.
    Email: [email protected]
    YouTube: https://www.youtube.com/@dodgeboy2785

  3. #3
    Tuner in Training
    Join Date
    Nov 2020
    Posts
    15
    emailed you

  4. #4
    Tuner
    Join Date
    Aug 2021
    Location
    Indianapolis Area
    Posts
    172
    Quote Originally Posted by guimond47 View Post
    emailed you
    Sounds good.
    Just replied to you.