Results 1 to 5 of 5

Thread: Gen3 Coyote Charge Pipe Size

  1. #1
    Tuner in Training
    Join Date
    Jan 2021
    Posts
    17

    Gen3 Coyote Charge Pipe Size

    Working on a twin turbo gen3 coyote. What is the hp (or lbs/min) limit of a 3” charge pipe? 3.5”?

  2. #2
    Advanced Tuner small tuner's Avatar
    Join Date
    Nov 2015
    Posts
    271
    3.5" and 1600+ whp zero issue
    Turbocharged COYOTE

    PM for E tune / Remote Tuning
    [email protected]

  3. #3
    Senior Tuner veeefour's Avatar
    Join Date
    Oct 2016
    Location
    Poland
    Posts
    1,743
    Quote Originally Posted by small tuner View Post
    3.5" and 1600+ whp zero issue
    Not in the lifetime with a stock MAF...

  4. #4
    Senior Tuner veeefour's Avatar
    Join Date
    Oct 2016
    Location
    Poland
    Posts
    1,743
    Quote Originally Posted by 61unicoyote View Post
    Working on a twin turbo gen3 coyote. What is the hp (or lbs/min) limit of a 3” charge pipe? 3.5”?
    3.5" around 14psi with stock MAF, might go below period 80 which is not what sensor likes. It will work below but not stable.

  5. #5
    Tuner in Training
    Join Date
    Jan 2021
    Posts
    17
    Quote Originally Posted by veeefour View Post
    3.5" around 14psi with stock MAF, might go below period 80 which is not what sensor likes. It will work below but not stable.
    Thanks much….that’s what I was needing ( stock maf and period limit). Thanks!