Results 1 to 7 of 7

Thread: Cruise control min speed changes

  1. #1
    Tuner in Training
    Join Date
    Feb 2023
    Posts
    24

    Cruise control min speed changes

    Has anyone successfully lowered the min cruise control set speed?

  2. #2
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    6,781
    Been years since I messed with it and I remember it working down to a point - something around 30mph I think, but lower than that and it wouldn't anymore. I don't even recall where it is in the tune anymore. May have even been using different software since I did a quick look and couldn't find it. Just remember lowering it for a particular customer who used cruise to drive on.
    Last edited by GHuggins; 03-22-2023 at 11:15 PM.
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC

  3. #3
    Tuner in Training
    Join Date
    Feb 2023
    Posts
    24
    Thanks for the reply. I had a '17 F150 I set as low as 20-21mph if I remember correctly. This Yukon 5-6mph higher and I wasn't sure if it would actually take if I changed it. I regularly drive through a speed trap that's about 2 miles long with a speed limit of 20mph and it was convenient to set my cruise to get through it as its pretty easy to go just fast enough to get a ticket. Screenshot 2023-03-23 at 4.35.37 PM.png

  4. #4
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    6,781
    What version of the editor are you using? I can't find it anywhere for the life of me anymore. I remember distinctly adjusting it on a 15 escalade though - even went back to that cal and couldn't find it, so didn't know if it was just removed or if I used EFI then? What section is it under?
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC

  5. #5
    Advanced Tuner
    Join Date
    Dec 2019
    Location
    MS
    Posts
    568
    Quote Originally Posted by GHuggins View Post
    What version of the editor are you using? I can't find it anywhere for the life of me anymore. I remember distinctly adjusting it on a 15 escalade though - even went back to that cal and couldn't find it, so didn't know if it was just removed or if I used EFI then? What section is it under?
    I dont see it anywhere in EFI for a E92

  6. #6

  7. #7
    Tuning Addict
    Join Date
    Jan 2015
    Location
    Franklin, NC / Gainesville, Ga
    Posts
    6,781
    I found it in a trucks 16 cal. Still doesn't make sense though because I would have been editing it with a version of 3 at that time and "I would think" on an older vehicle. It may have been a 16. Thought it was the other guys though. Been too long ago to remember :/ Oh well...
    2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
    2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80

    ~Greg Huggins~
    Remote Tuning Available at gh[email protected]
    Mobile Tuning Available for North Georgia and WNC