Can HP unlock an Isuzu 6.0L ECM? We get them in the shop and was wondering.
Can HP unlock an Isuzu 6.0L ECM? We get them in the shop and was wondering.
It's possible. Just hook up to it and see if it'll read the calibration out. It's most likely still using a gm ECM with a GM written calibration. It will be different though if it's anything like the calibrations they put into the Freightliners. Don't think a calibration change will help their cam failures, but don't know if their running DOD on them or not.
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
Reply With Quote