Results 1 to 3 of 3

Thread: MVPI3 prolink to BOSCH 17212 wideband directly?

  1. 04-17-2023 #1
    Windsma
    Windsma is offline
    Tuner in Training
    Join Date
    Apr 2023
    Posts
    49

    MVPI3 prolink to BOSCH 17212 wideband directly?

    Im sure the answer is here somewhere and I will keep looking.

    I tried to get cheap and ordered a new Bosch 17212 Wideband O2 Sensor LSU 4.9 omitting the AEM gauge from the equation.
    I have a mpvi3 and prolink+
    I also have a ignition 12v and ground from my deleted MAF that would be convenient to use for the wideband.
    So, can the wideband be wired directly to the prolink+ or does the AEM gauge have some wizardry inside it?
    Last edited by Windsma; 04-17-2023 at 09:07 PM.
    Reply With Quote Reply With Quote
  2. 04-17-2023 #2
    gtstorey
    gtstorey is offline
    Senior Tuner
    Join Date
    Nov 2017
    Posts
    1,454
    Won’t work that way.
    Reply With Quote Reply With Quote
  3. 04-17-2023 #3
    Windsma
    Windsma is offline
    Tuner in Training
    Join Date
    Apr 2023
    Posts
    49
    Well, amazon sells the AEM 30-4110NS gauge kit for $94 will that model work?
    Last edited by Windsma; 04-17-2023 at 09:30 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »