Results 1 to 4 of 4

Thread: unit problem / glitch

  1. #1
    Tuner SuperG5's Avatar
    Join Date
    May 2021
    Location
    Mars
    Posts
    50

    unit problem / glitch

    when i try changing the units type after the input box in the top where you can write in numbers for parameters and math, i get to BLANK unit and have no idea what form the parameters are showing up as. Screenshot (11).png next to my mouse / cursor is the area i am talking about. i dont know how to reset this. please help.

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,248
    right click on a cell and go to units to select the unit you desire.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Tuner SuperG5's Avatar
    Join Date
    May 2021
    Location
    Mars
    Posts
    50
    thaankkk youuu sooo much . i was going crazy over here trying to change my torque demand values in a weird number form. what unit is "Number ()" is this the true value used by the ecu?

  4. #4
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,451
    screenshot.03-03-2021 16.30.06.png

    Just make sure you don't accidentally set the units to dunecat.

    All the numbers in all the tables are just stuff translated into human-comprehensible formats by the GUI, they don't necessarily have any relation to the stuff the ECM is actually using. Probably if you saw it the way the ECM 'sees' it it would look like a really long string of weird characters.