Hello all,
I am installing Vortech BAP and ID1050xds injectors for my Mustang GT A10 before installing my ESS G3X kit
For injectors data is good and could modify everything needed. The question is more related to BAP
as this BAP will keep stock pump at 18V does this require tuning on fuel side in HP tuners please?
I saw VMP recommended some changes ( like lowering voltage by 1 2 V ..) any clue what should be needed please ?
Best regards,
Mehdi
I have a good tune for 250.
The answer to all your questions:
https://forum.hptuners.com/showthrea...ft-pump-tuning
Many thanks, i read your post and is very helpfull, i didn't find these data before.Originally Posted by engineermike
For the recommendations of VMP, so you didn't apply anything please ( as in the picture )? 348841299_1689108168187749_1365467646508232572_n.jpg
He is referring to the “full on threshold”. It is only for gen1 and 2. Gen3 uses feedback control, so the parameter is not needed.
Reply With Quote