Results 1 to 18 of 18

Thread: Need Help with Tune

  1. #1
    Potential Tuner
    Join Date
    May 2023
    Location
    Long Island, New York
    Posts
    9

    Need Help with Tune

    Hi-
    I have a 2000 Camaro with a 6.0 Gen iii Iron Block, LS3 Heads and intake. Stage two cam from Texas Speed .229/244.629"/615? 112 LSA, 109. LS3/ LS 7 EV6 Injectors, 4L80e with a 3000 Stall. Stock bottom end. I have attached the files, please find for reference. The car runs too rich, doesn't idle. Problem with shifting as well. It Shifts too early. Thanks in advance.
    They are 60 LBS Injectors.
    Attached Files Attached Files

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    Who's injectors are they? Part Number?

    Cylinder volume is wrong for a 6.0, change that.

    Change the open loop EQ ratio to have the cells above 130 degrees at 1.00. Usually I just copy over a later P01 file that is already like that.

    Cut the minimum fuel miligrams in half or more, that will help with the rich idle.

    Past that you will have to play with the idle airflow and timing to get it to idle okay, then start tuning the MAF and VE tables with a wideband oxygen sensor.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Potential Tuner
    Join Date
    May 2023
    Location
    Long Island, New York
    Posts
    9
    Thank you, I purchased the injectors from Treperformance
    https://treperformance.com/i-2099749...=tre+60lb+ev6+

  4. #4
    Potential Tuner
    Join Date
    May 2023
    Location
    Long Island, New York
    Posts
    9
    I'm sorry, I'm new to this.

  5. #5
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,451
    Redrilled injectors with no data. This will not make for a fun first tuning experience.

  6. #6
    Senior Tuner
    Join Date
    Mar 2022
    Location
    Indiana
    Posts
    2,779
    Did the injectors come with a datasheet?

  7. #7
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,451
    Quote Originally Posted by SiriusC1024 View Post
    Did the injectors come with a datasheet?
    Of course not, because the seller proudly states that they have a flow bench, like they think that's the important part.

  8. #8
    Senior Tuner
    Join Date
    Mar 2022
    Location
    Indiana
    Posts
    2,779
    That flowbench in their vid looked like the garbage Russian injector cleaner/balancer I got on ebay one time. Sent that thing back after trying it one time.

    I was hoping that they sent one per order since they state variance on final product is expected.

  9. #9
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,451
    Yeah, variance in flow rate. They really think they're doing something. Or hoping to attract only the customers who don't know any better.

  10. #10
    Potential Tuner
    Join Date
    May 2023
    Location
    Long Island, New York
    Posts
    9
    No, they didn't.
    2000 Chevrolet Camaro | 2016 Silverado Z71

  11. #11
    Tuner
    Join Date
    Dec 2022
    Location
    Tennessee
    Posts
    159
    I had the same issue on my initial tune and realized the primary and secondary were my main issue. I suggest you use your base VE tables for primary and secondary and pull .15 percent out at 400 to 1600 for both, and bump idle to 850.

  12. #12
    Potential Tuner
    Join Date
    May 2023
    Location
    Long Island, New York
    Posts
    9
    I tried to do that, started idling better but now it tries to shift into 3rd gear as soon as it hits 5mph.
    2000 Chevrolet Camaro | 2016 Silverado Z71

  13. #13
    Potential Tuner
    Join Date
    May 2023
    Location
    Long Island, New York
    Posts
    9
    2000 Chevrolet Camaro | 2016 Silverado Z71

  14. #14
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    4L60 or 4L80?

    You typed 4L80e but the tune is for a 4L60e.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  15. #15
    Potential Tuner
    Join Date
    May 2023
    Location
    Long Island, New York
    Posts
    9
    I asked the tuner about that too and he told me that since I have the adapter from the 4l60e to a 4l80e it shouldn't matter. I have attached the file as well, it says it's in third gear when I was in reverse and then it shifts hard and bogs down.

    trans-.hpl
    2000 Chevrolet Camaro | 2016 Silverado Z71

  16. #16
    Potential Tuner
    Join Date
    May 2023
    Location
    Long Island, New York
    Posts
    9
    Base- Current 4l80.hpt

    That is the tune I just loaded on to it, does this look alright?
    2000 Chevrolet Camaro | 2016 Silverado Z71

  17. #17
    Potential Tuner
    Join Date
    May 2023
    Location
    Long Island, New York
    Posts
    9
    Bump

    Need help with the 4L80
    2000 Chevrolet Camaro | 2016 Silverado Z71

  18. #18
    Senior Tuner
    Join Date
    Mar 2022
    Location
    Indiana
    Posts
    2,779
    What's going on? Did you apply the that tune you posted yet? Attached your latest tune and log.