unsure how to resolve this issue or what keeps causing my engine to start running super lean out of the blue,current tune.hpttest drive with 02 reading.hpl
unsure how to resolve this issue or what keeps causing my engine to start running super lean out of the blue,current tune.hpttest drive with 02 reading.hpl
Looks Like it runs lean from the very start on this data log. Reset your fuel trims and plot wide band error percentage. Take the error and make changes to either you mas airflow or ve table to correct.
If it's that lean with such minimal mods you have other problems.
Like low fuel pressure, exhaust leaks before or directly after the o2 sensors or a vacuum/intake leak after the MAF sensor.
I've never had a cold air intake on the GEN 3 MAF sensors cause massive lean codes.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
ive double checked everything u stated up there and it all seems to check out, i have no current exhaust leaks, intake leaks, or low fuel pressure. Just a little concerned about running to 17 afr not shooting for fuel economy exactly. I also cant my commanded afr to pop up in channels list any idea how to work around this to fill my afr error tables so i can tune via maf? Im relatively new to tuning.
why dont you have any O2 data?
should be 02 data under my graphs
What's so hard about this problem? OL-Fault. B2S1 O2 is dead.
see im having some simliar issues but worse