Speed density, open loop, 2 bar 411 PCM, D1SC 2002 Camaro, 4L60e, 3600 Yank, 3.70 gear, 26.4 drag radial
Just had the car out on Saturday first time and ran great, but a few issues to tweak/resolve.
The first issue is that I am way lean at the launch according to the data log. But not lean enough to cause a stumble or hesitation.
Pulls hard up to 6600. Logged peak boost of 8 psi. Best 60 ft was 1.62 with no traction issue, so a bit lazy.
What is the best way to get an accelerator pump like hit of fuel when going from idle to WOT almost instantaneously?
Power enrichment table only or a combination of VE and PE?