RPM Gauge Not Reading

[Wildman4x4]

Hello,
I'm new to all of this so please take it easy on me....

I'm working with a 1998 Dode Ram 1500 5.2 PCM & a 1998 Dodge magnum 5.9 (360) V-8 that is stroked to a 6.7 (408) and the PCM is currently running the stock tune. This is a JTEC PCM and I've been trying to get the RPM's to read but nothing I've done seems to work. I'm using a MPVIC2+ Pro

https://youtu.be/gHslmLoq_aA

I've got a AEM Wide Band O2 sensor connected to Pro input and have the channel for it added. I've removed the Engine RPM's and then added them back which hasn't helped.

I also connected my DTC scanner with live data to verify that I have a RPM signal.

https://youtube.com/shorts/4JZBWemw16Q?feature=share

Any ideas or suggestions?

Thanks

[K44]

Bad RPM gauge?