2013 F150 5.0 tuning

[Friesen856]

Hey everyone, just picked up a mpvi3 for this thing. I want to adjust the torque management and shift rpm/speed for starters. Which set of parameters are to be adjusted for this? Thanks in advance

[SiriusC1024]

Open VCM Editor. Click OS. Apply RPM patch code modification.

[Friesen856]

Nothing seems to change the shift points for this thing. I set rpm limiter higher and even in manual, 6200 or so max

[SiriusC1024]

Changing WOT should have an effect.

The others won't matter because the transmission is in Torque Based shifting schedule instead of by gear.

[Friesen856]

Which section would that be in? Because I've try numerous changes to this

[SiriusC1024]

This is from a 2013 F-150 5.0 file:
2013 F150 WOT.png

You've tried changing it?

[SiriusC1024]

Ohhhh. Maybe you have to go to Airflow>Electronic Throttle> Pedal Pos WOT Start and End. Sorry didn't think of that. It's one of the first changes I make.

Pedal movement is 0-512 counts.

Start = 436
End = 496

[Friesen856]

Wot shifts set to 6500, and pedal movement set, still no good. Maybe even worse. Shifts 56-5800

[Friesen856]

Figured it out, now hitting 7k on the shifts. Now to get them a little quicker and firmer. Also noticed the throttle not opening as fast as the pedal. And how can I get some of the torque management off?

[K44]

Figured it out,

Care to share what you figured out?

Many of us have never seen a gen 1 truck

[SiriusC1024]

What was the fix?

Get me a log with these settings. Let's see if a limiter is in effect.

[Friesen856]

Turned all rpm limiters to 7500. I believe the 1-2, 2-3....shift mph is what changes it. My laptop is at work so I'll load the log tomorrow

[Friesen856]

this work?

[SiriusC1024]

Yep no limiters active.