Hi guys,
I have a customer using a 07 Tahoe MAF, with the two MAF table calibration settings behind a 09 Express OS which uses the single MAF calibration.
I know it will need to be tuned regardless, to scale. But I wanted to set a base MAF cal up to tune off of.
I have attached a couple screen shots,
What would be the proper way to set this up? Use the values close to 1000, for low starting out and the values for 5800 for high starting out and interpolate it all in the single cal?
Then tune the MAF from there?
Something new I have not ran into.
09 express.JPG07 tahoe.JPG