Hello. I'm a noob to all this so please I'd like to apologize up front for anything I might say that is off base.
I have a 2005 C6 Corvette with a 6.0L LS2, just installed a CARB legal A&A Corvette Supercharger kit.
About a month ago I picked up a MPVI 3 kit to upload the A&A CARB legal file for my supercharger.
Picked up a refurbished Dell Latitude E7270 laptop off Amazon that I saw on the forums many people using for tuning only.
So last night I downloaded the stable version of VCM Suite version. 5.0.4 plug the MPVI3 into the OBD2 port and connected to the ECM.
It spit out the basic info and then I tried to do a info log and it popped up a Interface Firmware update where 10 seconds into this procedure says that the update failed.
I tried this several times, disconnected the USB cable and interface from the OBD2 port, reset the computer, deleted VCM suite, and re-installed and nothing is working.
I put in a ticket and I get a response of please send a info log!!
Is this a VCM Suite issue or an actual interface issue?
Does the stable version need the drivers on the site? I couldn't get the drivers to download and communicate the VCM suite program, couldnt find a file that said run.
Any help or guidance would be appreciated.