Challenger Scatpack Burble Tune
I am trying to burble tune my 19' scat pack, I watched a video and did as he did in the video and it didn't make any huge difference that I coud tell.
Link is below, https://www.youtube.com/watch?v=4M-kaaAiZ40&t=315s
My tune file is attached as well, it's a 93 tune from jay greene racing.
Any tips that y'all have would be greatly appeciated.
Tuned Read ECM Only 7-3-23.hpt
Last edited by immason25; 07-04-2023 at 12:38 AM.
What if.....
your minimum spark table says...no ?
he said yes...
Did some changes to your tune similar to mine. Also raised your Rev Limiter up.
Hi bro, I just saw your tune is very aggressive, dangerous for the engine -40 is too much it can break rings and burn valves and these engines are very delicate, it will make a lot of noise but I don't recommend using so much maximum field -20 to achieve good pops and for flames you will need less than that. i tell you for me experience
Its not -40. its just 40. in places you will never see anyway
Reply With Quote
Originally Posted by 