Results 1 to 7 of 7

Thread: idle hang after new injectors

  1. #1

    idle hang after new injectors

    I upgraded my snake eater injectors to snake eater pro injectors, however now my idle hangs around 1300-1400 when coasting and 1000-1100 at idle. If i let off the gas my car will drive itself.

    I have tried lowering base minimum airflow, and it seems to have no affect. I have never seen this, I have been tuning this car for several years and this is a first for me, any help is greatly appreciated.


    throttle hanging in idle and in coast.hpl
    af minimum lowered.hpt

  2. #2
    Advanced Tuner
    Join Date
    Dec 2019
    Location
    MS
    Posts
    567
    vacuum leak?

  3. #3
    That's actually a pretty good idea, my vacuum is lower than it should be, I will check the hose behind the intake manifold and see if I forgot to reattach it, as soon as it cools down

  4. #4
    visually everything is great, I will smoke test it tomorrow, just to be sure

  5. #5
    Fixed: thank you for the help, the new injectors had o-rings that were too small, when I smoke tested the intake manifold, smoke poured out of every injector. I replaced the o rings top and bottom and everything is good again. Greatly appreciate the help.

  6. #6
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,646
    There are two lower o-ring bore sizes:

    innjector dimensions.jpg

  7. #7
    Advanced Tuner
    Join Date
    Dec 2019
    Location
    MS
    Posts
    567
    Well dang that was really easy.