I've seen it kind of hidden in a few threads, but I just wanted to make sure before I possibly grenade my engine. I had my supercharged 5.7 remote tuned long ago, felt it always had a lot left on the table. Noticed on datalog once in boost the timing doesn't change. I then noticed the WOT spark table was thoroughly written, with scales for boost ranges on the axis for pressure ratio edited, but the MBT tables were not as thoroughly edited, and once I'm into boost range, my timing sits at the 1.0 ratio (MBT spark tables limit) spark range. Should I just copy the data from the WOT spark table to the MBT table, including axis data?