Datalog

[mohammed-hilal]

Kindly can someone help to read my data log if it?s good or not

Should be stage 2 tuning the downpipe and intake air

My car w213 2017 4matec

The run from 2000 RPM on 4th gear till cut 2ndgear4.hpl

[outlaw_50]

Checked Log:

- Not too many informative channels (vcm dont support all the important channels)
- Short Trim Bank 1 is too lean
- Short Trim Bank 2 is not logged
- Lambda looks good
- Timing looks good
- Overboosts @3700 rpm then boost drops hard which is not good

I would be worried about knocks where it overboosts and goes too lean 25%