Challenger SXT (3.6L) Tune Help

[Gun]

Hey guys, so I'm trying to burble tune my 2018 v6 challenger but it is not going so well for me. I was wondering if anyone could help me make a nice tune or just give me a few pointers on what to do.


I watched a couple of videos but followed this one

https://www.youtube.com/watch?v=4M-kaaAiZ40&t=315s

I know its not exactly for my car but it was close enough so I followed everything he did and copied his spark table (Changed ECT temp from 133 to 285 in DFCO settings). When I applied the tune, I first revved my car to 3500 rpm to test it out and when I did, the rev got stuck and kept bouncing between 3300 and 3500 rpm. I put my stock tune back on so I can get more time to figure it out. I linked my stock tune and the burble tune I made on this so if anyone can help me out that would be wonderful, thanks!

default.hpt
new.hpt


also, if someone could tell me what I did wrong to cause my rpm to bounce between 3300 and 3500 that would be nice too lol

[Gun]

bump

[Vbb1994]

I got your private message, i'll have a look at this perhaps later this evening. I tried to reply in our message but it wouldnt send

[Vbb1994]

ok hopefully this works for what youre trying to do


2018 Challenger SXT 3.6L blurble.hpt