Results 1 to 4 of 4

Thread: Safe 4l60e Torque management settings with stock 6.0L LQ4

  1. 08-26-2023 #1
    NLBlazer
    NLBlazer is offline
    Potential Tuner
    Join Date
    Jul 2023
    Posts
    6

    Safe 4l60e Torque management settings with stock 6.0L LQ4

    I have been trying to tune my stock 6.0L lq4 and 4l60e. I want to make my 4l60 last as long as possible and I haven't changed any TM settings. By default the abuse mode seems to be disabled and I am confused whether this means I have been driving with 0 transmission torque management. I recently removed the engine torque management and it is no longer pulling timing for shifts. Does anyone know what settings i should be using to make my 4l60 last? I will be replacing it with a built one in the future but until that is ready I want to try and make this one last. Here is my tune right now, Engine Tuning + shift kms.hpt
    Reply With Quote Reply With Quote
  2. 08-26-2023 #2
    Matt Vardaman
    Matt Vardaman is offline
    Advanced Tuner Matt Vardaman's Avatar
    Join Date
    Mar 2021
    Posts
    207
    I replied on the Gen 3 post, and gave you a file to use as compare file.
    2001 Silverado 5.3 - 209/217 cam, GT45 Turbo on 7lbs, Aem x-series wideband, 50lb/hr flex fuel injectors, on E85 with content sensor

    1999 Silverado 6.0/4L80E Summit Stage one camshaft, 317 heads (replaced cast iron)
    Reply With Quote Reply With Quote
  3. 09-03-2023 #3
    project55
    project55 is offline
    Potential Tuner
    Join Date
    Sep 2023
    Posts
    1
    Were you able to correct your issue using this information?
    Reply With Quote Reply With Quote
  4. 09-13-2023 #4
    NLBlazer
    NLBlazer is offline
    Potential Tuner
    Join Date
    Jul 2023
    Posts
    6
    Yes, I got my torque management working properly after reading the replies on my other post https://forum.hptuners.com/showthrea...0e-TM-settings
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »