Results 1 to 4 of 4

Thread: Torque management reinstatement

  1. #1
    Tuner in Training
    Join Date
    Aug 2018
    Posts
    16

    Torque management reinstatement

    Hey all, so this might be a little unusual, but I would like to reinstate my TM on my 4.3 2000 Jimmy.

    Years ago I removed a portion of it, but damned if I remember what I did, lol.

    How do I put it back to stock? Also, should I invest in the Corvette servo?

    Thanks for any help guys and forgive me if I didn't provide enough info. Let me know if anything else is needed.

  2. #2
    Senior Tuner
    Join Date
    Nov 2017
    Posts
    2,307
    Find you saved copy of your original file or look for a stock one in the tune repository?

  3. #3
    Senior Tuner TheMechanic's Avatar
    Join Date
    Jan 2014
    Location
    SoCal
    Posts
    1,813
    CTRL+L will give the history. Go to the bottom where it says "Base". Right click it and open as compare file. Scroll to your torque management and copy over selected differences of any TM mods that are there.
    If you don't have a "Base" then you will need to find a stock read of a like vehicle either in the repository of out in the wild. Same scenario except you will use CTRL+5. Copy over selected differences.

  4. #4
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    9,439
    GM Gen4 Injectors v2.1.xls
    "My life has become a single, ongoing revelation that I haven't been cynical enough."
    Funny how accounts marked as 'banned' are still able to log in and do stuff on the site, huh?