Hey Everyone,
I just finished a cam swap on my first LS project, and I'm having trouble getting it to idle consistently. I've really only changed the base idle RPM tables, the BRAF, and I've taken 15% out of the main VE table at 1600 RPM and below. Other than that, I scaled up the injector flow rates to match the 76 lb/hr injectors in the car.
I can't get the car past just sputtering. I'm not sure what to try next to get it to run without potentially causing issues. Any ideas?
The cam is a Summit stage 1, nothing aggressive. The part number is SUM-8715R1 (link: https://www.summitracing.com/parts/sum-8715r1). 222/234 115+3, .600/.575 Lift.