Hey guys, what am i missing, no matter what info i put in for speedo calibration, my speedo is always 3mph off
Hey guys, what am i missing, no matter what info i put in for speedo calibration, my speedo is always 3mph off
Any Toyota Tacoma Tuners out there had this issue? Not matter what info I enter in speedo calibration the speedo reads slow... Is there something I am missing??
i believe with hp tuners the speedo calibration is for automatic trans shift points only.Originally Posted by desertfab racing
I had the same problem. the trans output channel is correct. i contacted HP on a ticket and they verified that the speedo is taken using the wheel sensors(ABS Trac con) and not the engine management. i eventually just took the bezel off the dash gauges removed the needle and placed it 3mph slower(reindexed)it. using GPS it is accurate at 60 MPH that's all I need for the purpose of slowing when police cruisers
are passed.
The owner's manual for your specific Tacoma model may provide information on adjusting the speedometer calibration. Look for a section that discusses instrument cluster settings or speedometer calibration.
Reply With Quote