Sea-Doo Limiter Removal Video Tutorial

[activejetsport]

Hi guys, we created a short video to walk you through the steps required to remove limiters from your Sea-Doo

We hope you find it useful.

[ninjawarrior821]

Great video!
And I would heed the warning from Ruthless too. Keep an eye on AFRs, and at the very least change the stock desired fueling to something safer in the Fuel > Power Enrichment tables. I've found that 0.855 lambda translates to 12.3 afr out of the ski, but your millage may vary.

[Tbranella]

https://youtube.com/shorts/ZOI3T0ioUHY?feature=shared oem lambda at wot is 90-91 afr 13.3- 13.5

yup.. 13s are lean for this motor at WOT

[Leski379]

Finally jumped on board the HP train tonight, used the video above and made the necessary changes. Wideband and prolink are ready. Good weather next! Thanks a bunch to ActiveJetSport for sharing this video. Big props to them!

[RUTHLESS]

Great video!
And I would heed the warning from Ruthless too. Keep an eye on AFRs, and at the very least change the stock desired fueling to something safer in the Fuel > Power Enrichment tables. I've found that 0.855 lambda translates to 12.3 afr out of the ski, but your millage may vary.

I'm glad someone was listening. :

[SJ-(KY)]

Hi guys, we created a short video to walk you through the steps required to remove limiters from your Sea-Doo

We hope you find it useful.

Great information and video Activejetsport! Thank you

[activejetsport]

Glad you guys are finding the video useful.

When you're ready to step up your game, we have the highest boost drop-in supercharger wheel for the 300 on the market. 19 PSI at the 8800 RPM range, no housing modification required.